This listing is NOT for the engine cover. This is an engraving add-on for folks that got in on the pre order.

DISCOUNT CODES ARE NOT ALLOWED TO BE USED WITH THIS LISTING.

THE ONLY EXCEPTION IS THE CODE YOU WOULD OF RECEIVED IN AN EMAIL.

WANT CUSTOM ENGRAVING ON YOUR ENGINE COVER?

• IG Handle, your name, etc. (see pictures)

• 12 character limit (a space counts as 1 character) for FOCUS ST

• 10 character limit (a space counts as 1 character) for FIESTA ST

• You have to email me with your new order number AND your original Pre order #

• You have to order by Wednesday, 4/15

• Two fonts are available (bold and cursive). NO other fonts will be accepted

• See picture attached for example

• Word placement location cannot be changed

• The COLOR of the engraving will be the same as the cover. So if you order white…the engraving will be white

• If you ordered the cover unpainted, the engraving will be unpainted

• Customer can color the engraving if they’d like

• THIS IS NOT A CUTOUT, it's an engraving on the metal

• Engraving space is limited. So make it short and keep in mind of word spacing

1. Why does it cost $45.00? engraving requires a custom bit. The CNC machine also has to slow down to half speed.

2. Why am I limited to 2 Fonts? These fonts have been tested to work. A new font would require a change in the design to make sure it cuts on the router correctly.

3. What color is the engravement? The engraving matches the color you chose. So if you ordered it white…the engraving will also be white. You can color engraving if you’d like.

4. Do you offer custom colors for the engraving? No, as mentioned above, the engraving matches the color you choose. The client in the picture colored his font grey with a paint pen.

5. Why is there a character limit? Space limitations on the cover.