Focus RS Front Splitter Lip.
SAVE money with the 3-piece modular splitter kit. Each section bolts together securely to form a single, assembly. Once installed it presents the same clean, appearance and aerodynamic performance as the 1-piece variant.
Details
High grade Aluminum (not plastic)
Powder Coated a txt Industrial Satin Black
You must drill into your bumper (easy stuff)
REMOVAL OF BUMPER AND OEM LIP REQUIRED*
Bolt-on fins included
Hardware included
No instructions included ( Professional installation highly recommended).
MADE IN THE USA
Splitter also fits under the less aggressive Maxton Splitter.
Powder coating is an option
Support rods Highly recommended. If you opt out of rods we suggest purchasing one from a third party. The rod mounting holes will have to be drilled by the client. Our splitters do not come pre-drilled for rods as client preference on mounting location can vary.
Shipping Info: CLICK HERE
PROFESSIONAL INSTALLATION HIGHLY RECOMMENDED
*Bumper is easy to remove, but the OEM front lip removal is required to get the nuts and bolts installed (this plastic panel takes times and patience!). Also since this aluminum splitter is stiff, it prevents the bumper from flexing, which MIGHT prevent the inner wheel well splash guard from aligning to the bumper mounting hole. This doesn't really affect anything.
SKILL LEVEL 3- PROFESSIONAL INSTALLATION HIGHLY RECOMMENDED!
SHIPPING:
SHIPPING TO LOWER 48 US STATES ONLY.
HAWAII, ALASKA, APO AND INTERNATIONAL CLIENTS please email me
Focus RS Front Splitter Lip.
SAVE money with the 3-piece modular splitter kit. Each section bolts together securely to form a single, assembly. Once installed it presents the same clean, appearance and aerodynamic performance as the 1-piece variant.
Details
High grade Aluminum (not plastic)
Powder Coated a txt Industrial Satin Black
You must drill into your bumper (easy stuff)
REMOVAL OF BUMPER AND OEM LIP REQUIRED*
Bolt-on fins included
Hardware included
No instructions included ( Professional installation highly recommended).
MADE IN THE USA
Splitter also fits under the less aggressive Maxton Splitter.
Powder coating is an option
Support rods Highly recommended. If you opt out of rods we suggest purchasing one from a third party. The rod mounting holes will have to be drilled by the client. Our splitters do not come pre-drilled for rods as client preference on mounting location can vary.
Shipping Info: CLICK HERE
PROFESSIONAL INSTALLATION HIGHLY RECOMMENDED
*Bumper is easy to remove, but the OEM front lip removal is required to get the nuts and bolts installed (this plastic panel takes times and patience!). Also since this aluminum splitter is stiff, it prevents the bumper from flexing, which MIGHT prevent the inner wheel well splash guard from aligning to the bumper mounting hole. This doesn't really affect anything.
SKILL LEVEL 3- PROFESSIONAL INSTALLATION HIGHLY RECOMMENDED!
SHIPPING:
SHIPPING TO LOWER 48 US STATES ONLY.
HAWAII, ALASKA, APO AND INTERNATIONAL CLIENTS please email me
