Focus RS Front Splitter V3
THIS IS FOR THE FOCUS RS V3 SPLITTER (RELEASED JUNE 2019). It is more aggressive (sticks out more) than all other splitters for the RS, so choose wisely.
See illustration showing both V2 and V3 splitters
SHIPPING Processing : click here
Details
090 Aluminum
1pc splitter with bolt on fins (winglets).
You must drill into your bumper (easy stuff)
To install REMOVAL OF BUMPER BELLY PAN AND OEM LIP REQUIRED*
Bolt on side fins (this allows you to mount a variety of fins once I create new styles)
Hardware included
No instructions included ( Professional installation highly recommended).
MADE IN THE USA
Splitter also fits under the less aggressive Maxton Splitter.
Powder coating is an option
Support rods required. Which means they are not included.
PROFESSIONAL INSTALLATION HIGHLY RECOMMENDED
*Bumper is easy to remove, but the OEM front lip removal is required to get the nuts and bolts installed (this plastic panel takes times and patience!). You can also drill through this plastic panel if you choose to do so. Also since this aluminum splitter is stiff, it prevents the bumper from flexing, which MIGHT prevent the inner wheel well splash guard from aligning to the bumper mounting hole. This doesn't really affect anything.
SKILL LEVEL 3- PROFESSIONAL INSTALLATION HIGHLY RECOMMENDED!
SHIPPING:
SHIPPING TO LOWER 48 US STATES ONLY.
HAWAII, ALASKA, APO AND INTERNATIONAL CLIENTS please email me
THIS IS FOR THE FOCUS RS V3 SPLITTER (RELEASED JUNE 2019). It is more aggressive (sticks out more) than all other splitters for the RS, so choose wisely.
See illustration showing both V2 and V3 splitters
SHIPPING Processing : click here
Details
090 Aluminum
1pc splitter with bolt on fins (winglets).
You must drill into your bumper (easy stuff)
To install REMOVAL OF BUMPER BELLY PAN AND OEM LIP REQUIRED*
Bolt on side fins (this allows you to mount a variety of fins once I create new styles)
Hardware included
No instructions included ( Professional installation highly recommended).
MADE IN THE USA
Splitter also fits under the less aggressive Maxton Splitter.
Powder coating is an option
Support rods required. Which means they are not included.
PROFESSIONAL INSTALLATION HIGHLY RECOMMENDED
*Bumper is easy to remove, but the OEM front lip removal is required to get the nuts and bolts installed (this plastic panel takes times and patience!). You can also drill through this plastic panel if you choose to do so. Also since this aluminum splitter is stiff, it prevents the bumper from flexing, which MIGHT prevent the inner wheel well splash guard from aligning to the bumper mounting hole. This doesn't really affect anything.
SKILL LEVEL 3- PROFESSIONAL INSTALLATION HIGHLY RECOMMENDED!
SHIPPING:
SHIPPING TO LOWER 48 US STATES ONLY.
HAWAII, ALASKA, APO AND INTERNATIONAL CLIENTS please email me
